Finished

It’s done! Well it’s never done and I do intend to keep up the odd post here and there as I experience riding and repairing things, but its on the road so time for a bit of summing up. It’s been a long project from conception last October to completion now. Most of this time was taken up with research and decision making. I didn’t keep track of all the time the construction took but I guess about 14 nights, 3 or 4 hours per nights so maybe 40 or 50 hours for the basic build (not counting tinkering adjustments and brake problems) but remember I have been in no hurry and had to learn a lot about running brake cables and tuning gears along the way, so you might not take as long.

I am thrilled with the bike and the reaction it gets from others (too much reaction at times, makes it difficult to get where i’m going!), and due the the Mundo’s well designed frame and the high spec components, it is the best bike I have ever ridden. I think I’m pedaling more than I would have liked so a bigger hub motor would be a more pleasant ride but I’m limited to the Australian 200wat legal limit and I’m sure the eLation is making the best of this limit. You may ask why not just get a more powerful motor as the police wont be able to tell anyway. As Allan at Elation explained, it is not getting picked up, it is being involved in an incident/accident when you will be required to prove that the motor is legal. Allan tells me this has happened to an Elation owner already, thankfully he had the 200watt option.

I have really enjoyed “making” my own bike (well assembling anyway) and I think this experience will pay off when i need to maintain or upgrade things. Money wise I have certainly not gone down the cheapest path with little change out of $4000 aust dollars. My budget was about $3000 but upgraditis seemed to take hold at every turn!

If your considering doing what I’ve done I think you could easily knock $1000 off my spend with different wheels and lower spec components, but personally I wouldn’t change a thing on my bike. Cheaper faster and likely better would be to buy a complete bike like the Surley Big Dummy, or even a complete Mundo, but again I’ve enjoyed the process so much that my next bike will be made this way too.

In the end the bike does what I wanted it to do; it stops me driving a car. It is also a statement, a very loud bright orange statement, about what is possible on a bike and that personal transport is a series of options not just choice between crowded public transport or driving in congested traffic.

That’s kind of why, when I could, I went for aesthetically appealing or matching colours. It’s a more convincing statement if it looks cool. And yes I am up myself…a bit.

Regrets I have a few…but may I say….

Frame

The Mundo frame is a well designed but not very well constructed piece of gear, but by all accounts the V3 is far superior to previous versions and I guess if I boil it down I only had a few niggles like over-sprayed paint and brake compatibility, and the already known dropout issue. However from a business goodwill point of view, I don’t think Yuba are doing themselves any favors selling this as a frame to end users unless they can sort out the quality and comparability issues. Mine came shipped direct from China which means checking on quality must be difficult for the Yuba guys. It will lead to many, like myself at times during this blog, underselling what is really a very good design.

I really don’t need the capacity of the Mundo, I’ll likely only ever have 60-70Kgs of cargo and passengers so a lighter better made bike might have worked just as well if not better. But the  Mundo frame is great to ride and it still needs to be in the shortlist of any serious cargo bike buyer.

Wheels

The Spinergys are great, light and stiff but only time will tell if the rear takes the weight. I rode about 1k the other night with my wife and 2 young boys and bags etc aboard and the wheel still runs perfectly true so so far so good! I’m sure the light freewheeling feel the bike delivers is due, at least in part, to the low weight of these wheels. I should have gotten a wheel with a wider rim to suit the fat balloon tyres, but they ride fine with 60psi.

Brakes

The big discs look great and eventually work fine but are likely overkill, 160mm front and V rears would work just as well. I am still having front shudder so if further adjustment can’t sort it out I guess I’ll be looking for a new set of forks.

eLation Kit

The other bits and pieces on the bike are pretty good stuff but the eLation cranks and front cogs are not as good, thankfully the front cogs are upgradable when i feel the need, and with the motor helping I really don’t change the front cogs much anyway.

Overall the eLation kit is great.  It will pull and give good assist at any speed, providing your in the right gear. It will cruise on 30Ks with no problems at all and can in the right conditions sit on 36ks or so for considerable periods (all this of course with moderate pedaling).  It is noisier and not as pretty as a hub system but until hubs get some kind of gearing it is the best way to take full advantage of the 200Watt Aussie limit.

Deflopulator

Hmm maybe its just me but I still got the flop.

Stand

The side stand I salvaged off my old cheap mountain bike was working great until I put any load on the bike then it just plain failed! I bought a cheap centre stand (from Morouya Bikes), seemed good but fouled the chain when folded up and in a low gear.

Eventual solution? Pletscher kickstand, the 2 legged stand that folds up on one side, very neat. Expensive and not able to cope with really any cargo loading but better than finding somewhere to lean the bike all the time! Thanks again to Cheeky Transport for this and a their generally interested and helpful service.

Azonic Pedals

Look good, cheap ($20- I think), went well until the first time caught in the rain now they are making the most awful groaning noises ever. Marked for upgrading. ****UPDATE*** These pedals have stopped groaning (after I lubed them up a bit more) and are still going strong 600+ks later! I do like the grip pegs, very secure, but they are ruining my work shoes.

Go Getter Bag – Yuba

Big – great, you can take anything with you with this bag. It’s an on bike bag,  it could be carried around at a pinch but if this is required just strap on a backpack instead.

Soft spot seats – Yuba

Good solid comfortable but for short trips sitting on a wooden board would be just a good! Easy to steal off the bike too.

Alligator Bullet Proof Brake and Gear Cables

Look good seem to work well, until I went to fit last bit of the rear brake cable when I discovered the last bit of cable was kinked.  Couldn’t really remove the whole kit from the bike now in little bits and return them. Mismatching cable now but not the end of the world.

Thanks to all for you views (over 1000 hits in 3 months or so) and to all for your helpful comments and encouragement.

Advertisements

Tags: , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: